Power Play has extended the interchangeable weighting technology to hybrids. The new tri-port weighting system not only allows for a lower, deeper center-of-gravity and increased MOI, but the three interchangeable weighted screws may be configured to encourage straight, draw, or fade trajectory. Now available through SW to replace your entire set of irons. Conforms with USGA Rules.

Comes preconfigured with three 6-gram weights in each port. Additional weight screws can be purchased.

The Power Play Caiman hybrid is a high-performance option to replace those long, hard-to-hit irons in the bag with some of the latest technological know-how. The pull-face construction utilizes an active maraging face insert welded to the 4-31 stainless body to help increase the spring-like effect and further save weight. Additionally, the score lines are CNC milled rather than cast or stamped into the hard S42 face material. A variable crown thickness (as little as 0.5mm) in the non-stress area of the head, which is the thickness of 5 sheets of paper! This concept was utilized to shift needless weight to a more desirable location deep and low within the head to propel the ball high and land soft. Weights and lofts are normalized so they produce repeatable and predictable distances to the same numbered iron. This makes it easier for the average golfer to fill a particular yardage gap without guessing at which loft to purchase.

Seemingly transitioned hybrids allow a choice between the fairways and easier-to-hit higher launching irons. These can be mixed and matched to provide the ideal set make up. An incredible high percentage of weight is concentrated very low to launch the ball with ease and provide an ultra-solid feel.

The new Acer XK hybrids are based on the most popular hybrid platform in our line, but we added a few new design elements to further improve upon the performance. First, we incorporated a variable face thickness to reduce the perimeter area of the impact area so the entire club face could be more active. This acts to increase the area of forgiveness over a larger portion of the face. Secondly, the crowns were constructed with our exclusive VCT (variable crown technology) that measure as little as 0.5mm thick. All the unwanted weight normally reserved for the crown was repositioned deep within the head for added stability, feel and added trajectory to hold greens better. Length and lofts were selected to be exact replacements for the same numbered long irons in terms of yardage.

If you thought hybrids were easy to hit, the much expanded Acer XDS 'Wide Sole' Hybrid design offers you much more than current hybrid design. In fact, the design is based on fairway wood parameters that allow for the super high launch characteristics that make these hybrids easy to play. This set gradually decreases the volume or size of the head as the loft is increased and less help is usually needed. The rearward center-of-gravity of this hybrid design is enhanced by the rails at the soleplate to help you power through the grass and prevent 'digging' at impact for better quality contact with the ball. With its leading edge designed well forward of the hosel, you will be able to create more lift and produce higher launch angle thus more distance! This game- improvement set of hybrids will allow you to hit that high arching shot that you've always dreamed of hitting. Engineered for standard iron lengths, the Acer 'Wide Sole' Hybrid also provides you with additional control and accuracy. Be the first to employ these new game-improvement clubs at your course and take your game to a higher level!.

Conforms with USGA Rules.

The largest hybrids in the line complements the Mantara family with its distinctive look. Utilizing the same concept as the Mantara family, the square profile moves the center of gravity rearward and creates a higher MOI. Designed to replace traditional #3, 4 and 5-irons, these are large volume clubs for maximum forgiveness on off-center shots. The Mantara hybrids will set up much like a fairway wood with the face forward feature and will have a very neutral or straight ball flight, rather than many draw biased designs offered today. Conforms with USGA Rules.

The XDS Insider fairway woods derive their name from the very subtle visual aligning aids on the crown as well as the shape to encourage one to swing on an inside-out swing path. This is important not only to provide increased distance, but accuracy and a solid feel at impact. Golfers that swing on an outside-in path or sometimes called over the top move end up slicing the ball and losing confidence in their clubs. The Acer XDS Insider fairways were designed to prevent that.

Each numbered fairway wood in this series has a different face angle to help deliver the clubface square upon impact. For the average golfer, the lower the loft and longer the club, the more likely the clubface will be open at impact. But with our Square Optical Alignment System, it provides a “square” appearance to each club and creates a consistent appearance. This eliminates the need to make minor adjustments ball placement in the stance or how the golfer aligns to the target instead of letting the club do what it was intended to do.

While we have explained the Acer XDS Insider has technology you can see, it also has three other features you can’t see. A substantial amount of additional internal weighting was placed deep within the head to provide increased stability and create a higher launch angle. This is only possible by incorporating our exclusive Variable Crown Technology to lighten the crown area. We also have a variable thickness face for more explosive distance and incredible feel at impact.

The shallow face design and 4 way radius sole reduces contact with the turf for any course condition making this series one, if not, the most user-friendly fairway woods on the market today geared for the average golfer.

Finally, an innovative stainless steel fairway series that allows total game management by offering lofts to suit a player’s individual needs! There are three important technological features that make these higher performance clubs. First, we incorporated our variable face thickness to reduce the perimeter area of the impact area so the entire club face could be more active. This acts to increase the area of forgiveness over a larger portion of the face. Secondly, the crowns were constructed with exclusive VCT (variable crown technology) and measure as little as 0.5mm thick. All the unwanted weight normally reserved for the crown was repositioned deep within the head. Lastly, the wide profile increases the Moment of Inertia. All these features provide for a high launching ball flight with incredible accuracy. Versatility is another word to describe the Acer XK fairways. Multiple lofts are offered including those not commonly found from a strong 3-wood for players who have no problem getting the ball airborne to a high-lofted 9-wood. One addition is a 4-wood for those players wanting just one fairway wood in their bag. This allows you to add an extra wedge or hybrid to your set and stay within the 14 club minimum. Also, our 4-wood is an outstanding solo fairway wood for ladies or seniors looking for the perfect partner to a high-lofted driver.

The Avatar XMOI fairway woods are the epitome of progressive thinking. Built to bridge the gap from the extra large driver to the matching transitional hybrids, the shape is proportionally sized. The 3-wood being the hardest to hit, it is the largest to provide maximum forgiveness. Then the 5 and 7 woods are gradually scaled down to provide more than enough forgiveness. The shallow face, coupled with our VCT (variable crown thickness) places weight low and deep within the head for superior results.

The profile of the Caiman Fairways follows the same unique geometric shape as the matching Caiman driver. Every small detail was thoroughly examined from the squared off heel and toe areas, reduced face progression, decal size and locations to the masking of the paint lines. All of these features are designed to frame the club and assist in alignment to your target. Hireko engineered these fairway woods with a variable crown thickness (as little as 0.5mm which is as little as the thickness of 5 sheets of paper!) All the unwanted weight normally reserved for the crown of ordinary fairway wood was repositioned deep within the head. This provides you with a high launching ball flight with incredible accuracy.

Why settle for anything less as the Bellissima fairways are dimensionally proportioned to the matching driver and will provide assuredness to get the ball up quickly from the fairway or rough. The thick, heavy sole, shallow face and additional loft make these the most user-friendly lady fairways on the market.

The Dynacraft Dual Milled CNC wedges start with a five step forging process from a billet of soft carbon steel providing that unmistaken feel coveted by the most prestigious golfers in the world. This is indeed a true forging that is not to be construed with form forging using harder 8620 carbon steel that many other companies choose to manufacturer their wedges. Each groove is CNC milled to USGA conforming U-grooves that ensures consistency of both groove width and depth that less sophisticated methods such as stamping or hand grinding cannot. A secondary skim milling operation is performed on the face to create tiny micro-grooves which helps to increase surface roughness and further channel moisture between the ball and clubface for maximum spin. A brilliant high-chrome finish provides the classic look for years of durability and beauty. A thin topline and minimal offset, preferred at address, augment the semi-narrow 4-way camber sole design.

Rarely is there any innovation in wedges today as most take on a classic blade shape that was popular decades ago. While the limited offset aids in alignment and the narrow sole allows for the ability of opening up the blade for flop shots and other creative shots, they do little in the way of providing forgiveness when you are not on your "A" game.

The Acer XC wedge series does possess the thin topline, limited offset and blade-style appearance that golfers have been accustomed to.?But the difference is in the weighting which you cannot see in the address position. The undercut channel redistributes material so the there is more weight lower and more rearward allowing for an increased trajectory and spin to hold greens better. Square grooves offers maximum spin and control on approach shots to and around the greens. See for yourself how the Acer XC wedges can offer golfers of all abilities tour level quality with game improvement features.

The Awesome Professional Open Series 690 is heat treated in a black melonite finish for a unique, non-glare finish and a slightly softer feel. Black melonite is extremely durable and will provide many years of quality play. Conforms with USGA Rules.

Ultra-forgiving, the Bellissima driver is not only bold, but beautiful as well. The voluminous size and increased hitting surface will exude confidence at address. Coupled with additional loft, the ball will launch high off the tee for maximum distance. Lastly, it is finished in an exquisite gold PVD finish.

What does every golfer expect when they put a shiny new driver in play? More distance! But the USGA has been putting all sorts of rules and restrictions on club head designs to prevent that very situation from occurring. This is why designers have to be more creative in designing clubs to that will truly enhance their customers’ game. One method is to design clubs around the way average golfers swing, rather than creating perfect clubs and expecting golfers to swing that way. In that respect, there is still quite a bit room for improvement.

One of the most common tendencies is when a golfer comes over the top and makes an outside-in move. This is evident by most shots off the tee resulting into a push, fade or the dreaded slice. A Golf Digest article “Add 42 Yards Now” explained that if you were able to change to more of an inside-out movement a golfer who swung 95 mph could gain as much as 42 yards. Of course, this would require a huge change in how the person swings the club and let’s face it most golfers are not going to be able to put in that time and effort. But through creating design features in the club head, the golfer can be encouraged to make more of an inside path.

This is how the Acer XDS Insider got its name. The profile of the head as well as the contour on the crown was specifically designed to create a mental picture of swinging from the inside. This will encourage one to swing the driver on an inside-out swing path instead of that dreaded distance robbing over-the-top move.

The XDS Insider also helps you in two other ways. By adding internal weighting within the head in the heel area, this creates draw spin on center shots. The other method in creating a “draw bias” is the unique asymmetrical sole. More weight is shifted toward the heel in order to assist in rotating the head and squaring the face at impact.

The face angle is a little more closed than normal to provide some additional corrective measures. In many cases when a golfer sees a closed club face they are not even aware they are manipulating the club face or their stance open and essentially negating the potential benefit of the clubface being closed. The Acer XDS Insider’s addressed this problem as the face angle is cleverly disguised by the masking on the crown to provide a “square” appearance so they can just trust their natural swing. Lastly, the Acer XDS Insider also boasts a variable face thickness, cup face design to make the entire club face become one gigantic sweet spot and ensure that you get all the distance possible.

A square shaped profile, but a look and sound that even better golfers will revere. The large footprint at address coupled with additional material in the rear corners formed by the square shape, combine to produce superb perimeter weighting. We went steps further by positioning extra weight via adjustable weight screws in the most beneficial positions in the clubhead and augmented a beta titanium face for weight savings and performance. All this adds up to a high moment of inertia design designed to hit the ball straighter over the entire face.

At 460cc, it is equipped with dual adjustable weight ports for many custom clubmaking options for determining to proper weight and directional control for whatever length you desire. As shipped, the stock club is equipped with a 3g screw in the toe and a 10g screw in the heel ports. Additional screws (4, 6, 8 and 12g) are available to provide 36 different weight combinations from 193g up to 211g. Conforms with USGA Rules.

The handsome full-bodied appearance of XMOI Driver at address is the first thing that will grab your attention, not the sound. The extra large face area is augmented by a taller face height than most high MOI drivers on the market today and it will boost even more confidence off the tee. We exploited the full potential of the size as it looks larger than any other driver in our line to provide for the maximum stability on off-center shots. In addition, the Avatar XMOI driver produces both a pleasing sound at impact and brilliantly sculpted traditional shape which will be preferred by a wide range of golfers seeking maximum distance and accuracy.

See what Golf Tips Magazine said about the Caiman Driver: "At around a 100 bucks, this club is one of the best deals for a driver you'll ever find and produces high moi and great ballflight."

The inspiration of the unique geometry shape is based on the Amazonian Black Caiman. This powerful beast preys mostly on birdies and eagles and is fearless in devouring the competition on golf courses around the globe. Several iterations of this driver were drafted using CAD software until we were able to optimize the CG location for the best results. The elongated breadth, coupled with internal weighting produces an extremely stable, high moment of inertia design for exceptional raw distance and control off of the tee. Rounding out this design is a Physical Vapor Deposition (PVD) coating, creating not only an extremely durable finish, but also providing a lustrous black appearance. The process involves the deposition of titanium carbon nitride under low vacuum conditions. Conforms with USGA Rules.

If you are missing fairways off the tee on a regular basis, then the Acer XDS Insider Thriver was designed for you. We took the best aspects of a driver and a 3-wood to create the best of both worlds.

For instance, a driver is approximately 3 times the size of a #3 wood but has a much higher moment of inertia (MOI) making it more forgiving on off-center shots. Plus you have a large confidence-building, thin face that produces a spring-like effect right up to the legal limit for more distance. On the other hand, a 3 wood is more lofted and this cuts down on side spin for straighter shots, plus the shorter length enables you to have more control.

Why not just cut down your driver? It would be too light to effectively control. The Acer XDS Insider Thriver club head weighs a full 10g more than a normal driver to allow for a shorter, more controllable length that now has the proper amount of club weight. Plus we placed this added weight in a strategic location to produce an even higher MOI. Combine the higher loft (14º) of a stronger lofted #3 fairway wood and what you now have is the ultimate in control off of the tee.

The head shape and contour on the crown was specifically designed to encourage one to swing the driver on an inside-out swing path. Plus the XDS Insider’s internal weighting creates a draw enhancing ball flight on center impact. The masking on the crown using our exclusive Square Optical Alignment System, cleverly disguises the closed face angle to provide a “square” appearance so one can just trust their natural swing.

When a standard driver goes long but wrong and your #3 wood doesn’t give you the distance you need, the Acer XDS Insider “Thriver” edition is that one club you have been searching for.

Featuring the same radical square design as the original Mantara, the XL version is broader from front-to-back (8mm), but slightly shallower (4mm) to retain the 460cc limit. This moves the center of gravity not only further back, but lower as well. This helps to maximize the moment of inertia, resulting in less twisting on off-center shots, making it quite possibly our most forgiving driver to date!

The easy to align aerodynamic profile is constructed from a 6-4 titanium face and a thin, lightweight titanium crown, skirt and soleplate. See first hand how you can find more fairways off of the tee as a way of lowering your score.

Conforms with USGA Rules.

The Grand Hawk I-Cube 2 driver features the best combination of accuracy and distance. The new head design has a leaner look while having an extreme MOI for unprecedented accuracy and consistency from the tee. Discretionary weight is placed deep inside the rear corners for the straightest drives possible. With the addition of variable face thickness, ball speeds across the face have been enhanced to generate even more distance.

• Comparable to the Callaway® FT-iQ Driver

Acer XP 905 Pro Iron: The new Acer XP 905 Pro Irons are custom engineered for the low to mid handicapper seeking reduced offset, low ball spin and high flight trajectory. Continuing the evolution of our best selling standard XP 905 irons, the Pro version features stainless construction and the same deep undercut cavity and heel/toe "notch" weighting as the original XP 905's. The new XP Pro's offer maximum perimeter-weighting and a high moment of inertia for ultimate shot shaping control. The low center of gravity creates a higher launch angle and more solid feel at impact.

The new Bellissima Irons are a truly unique ladies set, not only in design and concept, but for their stunning appearance and performance as well. Since women first stepped on a golf course, their clubs have been ill-equipped for their needs. Our design team’s goal was concentrated on a ladies-specific line tailored to become more user-friendly for today’s lady’s golfer. The Bellissima irons provide the proper amount of loft to propel the ball with an elevated trajectory, while the generous wide and contoured sole helps it glide smoothly across virtually any condition. Authentic Swarovski crystals embedded in the sole complement the striking butterfly medallion.

Big, bad and bold are just some of the words to describe this powerful new iron design. The precision cast 431 stainless steel outer shell creates the foundation by optimizing the deep, rear center of gravity location for the extremely high moment of inertia resulting in superior accuracy and a driving trajectory. It is joined together with a separate high-performance face plate formed by an ultra-thin sheet of high strength 420 specialty maraging steel. This translates into a more explosive ball velocity coming off of the face for the ultimate in distance. From the ultra-wide beveled sole and heavy rear mass to the unique appearance at address, the Caiman Irons put more raw power in your hands to produce shots that you only dreamed of.

The Acer XK HT (High Trajectory) iron is designed for either slower swing players, beginners or those mid and higher handicappers looking to improve upon their iron play. A 30% wider sole than the standard Acer XK model coupled with additional loft and lower and a deeper center of gravity will enables the player to get the ball up in the air quickly from virtually any lie and hold the greens. The expansive undercut channel and generous hitting surface makes this one of the most forgiving irons available anywhere. Manufactured of 431 stainless steel.

Eternally opulent, like a 1920s movie star. Sinfully confident, going after the flag with a fixated hunger. Let the Obsession Irons seduce you. Go ahead, flirt with danger. And come out on top.

Who says an advanced game improvement model can't look conventional? While it does feature a moderate topline, reduced offset and classic profile at address, the secret is in the sole and rear cavity mass stabilizing bar. Enhanced perimeter weighting and wider, thicker sole focuses weight where it is needed for most golfers to experience a higher ball flight, a more solid feel and with precision accuracy. Put some muscle between you and the ball and fire away in confidence.

For the player heading toward single digits or perhaps already there, this model sports the true appearance of a blade. The distinction is just enough game improvement elements were augmented to give that player the edge to dominate the competition and continue to lower their score. The exclusive Stability Slot optimizes the CG location by pushing the weight further back from the face and redistributes the weight directly in the center of the face for that pure, unmistaken feel only a blade can provide.The Dynacraft Prophet Tour Blade is manufactured from an ultra-soft 304 stainless steel for an incredible feel at impact and finished with an exquisite black PVD coating.

The Tour Lies Concept 6 is designed for maximum playability with game improvement technology. The set incorporates three distinctive designs that will produce consistent results. This set takes the guesswork out of making the perfect mix of hybrids and irons.

• 3, 4 & 5 Hybrids: Three easy to hit hybrids. They are created with an oversized design which results in more forgiveness, improves M.O.I, and produces longer and straighter ball flights.
• 6 & 7 Irons/Hybrids: The 6 and 7 are hollow irons/hybrids that move weight rearward for high launching approach shots from the fairway or rough. The 6 and 7 utilize notch weighting to promote more accuracy. The wider sole design promotes forgiveness allowing for more confident and accurate swings.
• 8, 9, PW & SW: The 8 iron-SW are oversized short irons (with a classic design) with an oversized sweetspot that delivers precision and accuracy for firing at the flag.
• Comparable to the Adams® Idea Tech a4 OS Hybrid Irons

The Turner Ablaze Plus Iron has a wide and multi-functional sole design that combines a low center of gravity for the ultimate in game improvement playability providing an unbeatable combo of power and feel. The perimeter weighting creates high MOI for unsurpassed forgiveness while the oversized clubface gives confidence to all levels of golfers. The cavity insert helps to dampen unwanted vibrations and provides a more solid feel at impact. This design is perfect for golfers looking for an iron to improve their game. 

• Comparable to the TaylorMade® Burner Plus Irons

The Lady Grand Hawk XP-28 Combo Set combines the best of irons and hybrids. The irons (6-SW) have perimeter weighting that has been maximized to improve the moment of inertia (MOI). This improvment allows for more forgiveness on off-center strikes. Although the XP-28 iron has game improvement features, the center of gravity position has been designed to generate the optimal ball-flight trajectories. The Lady Grand Hawk XP Hybrid (4 & 5) is an advanced stainless steel design that utilizes technology in a high performance hybrid. Among the technology and design advances utilized in the XP Hybrid is a rearward notch sole design for the enhanced versatility required of a hybrid club and improved turf interaction from virtually any lie.

• Comparable to the Lady Callaway® X-22 Irons

The Acer XK Ladies iron is designed for ladies looking to improve upon their iron play. A 30% wider sole than the standard Acer XK model coupled with additional loft and lower and a deeper center of gravity will enables the player to get the ball up in the air quickly from virtually any lie and hold the greens. The expansive undercut channel and generous hitting surface makes this one of the most forgiving irons available anywhere. Manufactured of 431 stainless steel.

The Grand Hawk XP-28 iron has perimeter weighting that has been maximized to improve the moment of inertia (MOI). This improvment allows for more forgiveness on off-center strikes. Although the XP-28 has game improvement features, the center of gravity position has been designed to generate the optimal ball-flight trajectories. Its classic shape has a slightly thinner topline than most game improvement irons, yet still incorportes a large sweet spot for improved playability and forgiveness to attack any pin on the course. A great design for all playing levels. 

• Comparable to the Callaway® X-22 Irons